Honda ATV Winch Mount Installation And Review Videos

Bulldog Custom-Fit Steel ATV Winch Mount Installation - 2013 Honda FourTrax- Video

Jake: Hey, guys. Jake here with etrailer. Today we're going to be taking look at, and I'm going to show how to install, the Bulldog Winch Custom-Mount Winch Plate on our 2013 Honda Foreman.This is what our winch plate's going to look like when it's installed. It's going to attach to the frame of our four-wheeler and our front bumper. This winch mount is going to be custom-fit to be able to fit your 2012 to 2013 Honda Foreman. The winch mount is going to be a heavy-duty steel construction, with a nice black powder-coat finish to help resist against that rust and corrosion that you might encounter while out on the trails.The plates are going to be slotted to give you the ability to wash it properly, so it's not going to be a solid plate. more

7/1/2019 8:47:53 AM

Bulldog Winch Custom-Fit Steel Winch Mount Installation - 2018 Honda Pioneer 1000-5- Video

Speaker 1: Today on our 2018 Pioneer 1000-5, we're gonna be installing Bulldog's Custom Steel Winch Mount, part number BDW15190. This bracket is custom designed to work with your Pioneer 1000 Series ATV. It's gonna mount directly onto your bumper and allow you to mount a winch right onto it. What's great about this is that there's no drilling required to get the bracket mounted.We'll begin our installation by removing the front bumper. There's gonna be one Allen key that you're gonna have to remove here at the bottom. You'll remove that with a five millimeter Allen key. more

10/3/2018 3:07:13 PM

Superwinch LT2000 ATV Winch Installation - 2011 Honda Rancher- Video

Today on our 2001 Honda Rancher were going to be installing the Superwinch LT2000 ATV Winch part number 1120210. Well also be using the ATV winch mount kit part number 2202889 designed specifically for the Honda Rancher. To begin our install were going to remove the black bumper cover from the ATV. You have the 2 bolts on the bottom of the bumper cover and on the top here are 2 pushpins. With our front bumper cover removed well go ahead and loosen up the lower cover which will allow it to flex like so. We can now take our bottom plates facer and our main plate 2/4 by 3/4 bolts and their nuts within the frame of the ATV here. more

5/1/2012 3:39:50 PM